FT170 EMI/RFI Filters T Type

Eurofarad

SKU: FT170 EMI/RFI Filters T Type Categories: , ,

These filters consist of three elements, two inductors and one capacitor.
The attenuation is 60 dB/decade.
This type of filter is ideally used in circuits with low impendaces (<1 ohm). Dissimilar impedances, between source and load have little effect on performance.

TECHNOLOGY

  • Interconnection of multilayer ceramic discoidal capacitor and two inductors
  • Tinned metal housing (silver plated version on request)
  • Mounting : threaded ISO (I) or ASA (U)
  • Glass bead seal (V)
  • Solder tag terminals

WORKING CONDITIONS

Temperature range : - 55°C + 125°C

Conformity to AIR 2021 E or EN 2282 available

FILTERS CONFORMING TO STANDARD AIR 2021 E or EN 2282 and AIR 7305
The aim of standard AIR 2021 E or EN 2282 is to define inflight networks and a certain number of conditions of compatibility applicable to generators, (in flight and ground), to interfaces and functional equipment. It deals with a.c. networks with fixed frequencies (115 Vrms 400 Hz) and d.c. networks (28,5 Vdc) as well as the conditions when these serve in back-up functions. Standard AIR 7305 deals with test procedures of electric generation or equipment performance, however the specifications of electric generation and equipment must be compatible with AIR 2021 E or EN 2282 standard. Filters conforming to these two standards carry the prefix A and are specially manufactured with a view to their use in in-flight networks. They are systematically tested by means of voltage generators designed by our Engineering Department. For the characteristics of transients and subtransients it is necessary to refer to standard AIR 7305.

Data sheets

FT170 EMI/RFI Filters T Type

SKU: FT170 EMI/RFI Filters T Type Categories: , ,
» Do you need more details about this product?

These filters consist of three elements, two inductors and one capacitor.
The attenuation is 60 dB/decade.
This type of filter is ideally used in circuits with low impendaces (<1 ohm). Dissimilar impedances, between source and load have little effect on performance.

TECHNOLOGY

  • Interconnection of multilayer ceramic discoidal capacitor and two inductors
  • Tinned metal housing (silver plated version on request)
  • Mounting : threaded ISO (I) or ASA (U)
  • Glass bead seal (V)
  • Solder tag terminals

WORKING CONDITIONS

Temperature range : - 55°C + 125°C

Conformity to AIR 2021 E or EN 2282 available

FILTERS CONFORMING TO STANDARD AIR 2021 E or EN 2282 and AIR 7305
The aim of standard AIR 2021 E or EN 2282 is to define inflight networks and a certain number of conditions of compatibility applicable to generators, (in flight and ground), to interfaces and functional equipment. It deals with a.c. networks with fixed frequencies (115 Vrms 400 Hz) and d.c. networks (28,5 Vdc) as well as the conditions when these serve in back-up functions. Standard AIR 7305 deals with test procedures of electric generation or equipment performance, however the specifications of electric generation and equipment must be compatible with AIR 2021 E or EN 2282 standard. Filters conforming to these two standards carry the prefix A and are specially manufactured with a view to their use in in-flight networks. They are systematically tested by means of voltage generators designed by our Engineering Department. For the characteristics of transients and subtransients it is necessary to refer to standard AIR 7305.

Data sheets

Back to Top
menu
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram