Latching Micro-D Connector Series

Electrical Mechanical Specifications

• Temperature: -55°C to 125°C
• Dielectric Breakdown: 600 VAC RMS @ sea level
• Current Rating: 3 AMPS per contact
• Durability: 500 Mating Cycles min
• Insulator Resist: 5000 Meg ohms @ 500 VDC

Material Specifications

• Contact: Copper Alloy per MIL-DTL-83513
• Contact Finish: Gold per ASTM B488, Type II, Clas 1.27, Code C Over Nickel Underplate
• Insulator: Thermoplastic per MIL-DTL-83513
• Interfacial Seal: Fluorosilicone Elastomer per A-A-59588
• Hardware: Corrosion Resistance Stainless Steel

Shell Options:

• Aluminium with Nickel Plating: Alloy 6061 per SAE AMS-QQ-A-250/8 or SAE AMS-QQ-A-250/11
  Nickel per SAE-AMS-26074
• Aluminium with Black Anodizing: Alloy 6061 per SAE AMS-QQ-A-250/8 or SAE AMS-QQ-A-250/11
  Black Anodize per MIL-A-8625, Type II, Class 2

Omnetics Micro-D Catalogue

Omnetics Latching Micro-D Ordering Guide

• Latching Micro-D Discrete Wired (WD)
• Latching Micro-D Horizontal Surface Mount (H0)
• Latching Micro-D Vertical Surface Mount (V0)
• Latching Micro-D Card Edge Surface Mount (C0)
• Latching Micro-D Flex Circuit Mount (FF)
• Latching Micro-D Straight Thru-Hole Mount (S2)
• Latching Micro-D Right-Angle Thru-Hole Mount (R2)
• Latching Micro-D Soldercup (SS)
• Latching Micro-D Power

Omnetics Latching Micro-D Dimensions

• Latching Micro-D Discrete Wired (WD)
• Latching Micro-D Horizontal Surface Mount (H0)
• Latching Micro-D Vertical Surface Mount (V0)
• Latching Micro-D Card Edge Surface Mount (C0)
• Latching Micro-D Flex Circuit Mount (FF)
• Latching Micro-D Straight Thru-Hole Mount (S2)
• Latching Micro-D Right-Angle Thru-Hole Mount (R2)
• Latching Micro-D Soldercup (SS)
• Latching Micro-D Power

Omnetics Latching Micro-D Accessories & Misc

www.omnetics.com