Space Camera Systems IRIS 11mm (3DCS4M 11mm)

Categories: , Brand:
  • 4 Mpixels CMOS Camera Module (Mono or RGB)
  • Wide Angle Objective
  • TID 30 krad for the electronics,
  • SEL immune up to LET > 60 MeV.cm2/mg
  • Operating Temperature Range: -40°C to +70°C
  • 4 Mpixels CMOS Camera Module (Mono or RGB)
    • 2048 (H) x 2048 (V) active pixels (5.5 μm)
    • Read noise : 13e-, Full Well Capacity > 11ke-
    • Spectral Response: 400-750 nm
    • Integrated processing and storage memories
    • Two MDM 9 pins connectors
      • One Standard SpaceWire connector (up to 128Mbps downlink)
      • One power connector with a single 5V input power supply (compatible 4.5-9V)
  • Operating average power consumption : < 2 W @25°C
  • Up to 6 full resolution frame per second in burst mode, 1.5 full resolution frame per second in continuous mode through Space- Wire
  • Integrated temperature sensors
  • Wide Angle Objective
    • >55° Field of View (edge to edge)
    • 11.6 mm fixed focal length
    • 0.8 mrad angular resolution from 1m to infinity
  • Mechanical enclosure
    • 86x72x76 mm3
    • 370g

Description

The 3DCS4M 4MPixels 11mm focal length space camera is a complete vision camera system for space applications, such as monitoring and navigation for spacecrafts and landers.

Applications

  • Platform and Payload Monitoring
  • Navigation & Docking
  • Rendezvous

More information

Downloads

Manufacturer Info

Space Camera Systems IRIS 11mm (3DCS4M 11mm)

Categories: , Brand:

The 3DCS4M 4MPixels 11mm focal length space camera is a complete vision camera system for space applications, such as monitoring and navigation for spacecrafts and landers.

» Do you need more details about this product?

The 3DCS4M 11mm embeds 3D PLUS 3DCM734/3DCM739 high-resolution camera head, offering multiple readout features (sub-sampling, Region-Of-Interest, multi-parameters). It embeds within this module a high-performance electronic architecture based on a reconfigurable FPGA associated with volatile and non-volatile memories. The FPGA design allows efficient control of the sensor, as well as basic processing capabilities for image pre-processing and formatting, making the camera suitable for a large range of applications. The electrical interface offers two 9-pins connectors for both power supply and SpaceWire interface, for easy integration into complex systems.

The 3DCS4M 11mm Camera uses an 50° field of view (edge-to-edge) space qualified objective, allowing large area monitoring.

The 3DCS4M 11mm camera assembly is completed with a full aluminum enclosure, providing an optimal mechanical and thermal interface to the system, as well as further radiation shielding.

This camera system is based on 3D PLUS expertise, to provide a full camera system solution qualified for space harsh environment, withstanding radiation, temperature cycling, mechanical shocks, and vibrations.

  • 4 Mpixels CMOS Camera Module (Mono or RGB)
  • Wide Angle Objective
  • TID 30 krad for the electronics,
  • SEL immune up to LET > 60 MeV.cm2/mg
  • Operating Temperature Range: -40°C to +70°C
  • 4 Mpixels CMOS Camera Module (Mono or RGB)
    • 2048 (H) x 2048 (V) active pixels (5.5 μm)
    • Read noise : 13e-, Full Well Capacity > 11ke-
    • Spectral Response: 400-750 nm
    • Integrated processing and storage memories
    • Two MDM 9 pins connectors
      • One Standard SpaceWire connector (up to 128Mbps downlink)
      • One power connector with a single 5V input power supply (compatible 4.5-9V)
  • Operating average power consumption : < 2 W @25°C
  • Up to 6 full resolution frame per second in burst mode, 1.5 full resolution frame per second in continuous mode through Space- Wire
  • Integrated temperature sensors
  • Wide Angle Objective
    • >55° Field of View (edge to edge)
    • 11.6 mm fixed focal length
    • 0.8 mrad angular resolution from 1m to infinity
  • Mechanical enclosure
    • 86x72x76 mm3
    • 370g

Description

The 3DCS4M 4MPixels 11mm focal length space camera is a complete vision camera system for space applications, such as monitoring and navigation for spacecrafts and landers.

Applications

  • Platform and Payload Monitoring
  • Navigation & Docking
  • Rendezvous

More information

Downloads

Manufacturer Info

Back to Top
MSA Components GmbH
Am Glockenberg 13
57439 Attendorn
Germany
MAIL US
menu
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram