The 3DPM0211-1 POL Converter provides high performances, high reliability, compact size and low weight for Space Applications. Featuring specific radiation effect mitigation techniques and utilizing space design derating rules, the 3DPM0211-1 POL Converter is an ITAR Free product and features a SEL LET threshold of 80 Mev.cm2/mg and a TID of 50krad(Si).
Based on a Buck topology, the POL module uses a P channel Power MOSFET/Schottky diode stage at 400 kHz switching frequency.
From a 5V now available on almost every digital system, the POL module provides low voltages power supplis for most of today’s digital designs. Its Output voltage is adjusted from 1.225V to 3.8V by an external resistor. A very high speed control loop keeps the output voltage within regulation under the high transient load swings commonly found in high speed modern ASICs, FPGAs and Memory devices.
The POL Module is fully protected against output overload, input under-voltage and internal over-heating. The external ON/OFF command and Soft Start function enable any power supply ON/OFF sequencing.
Power Good signal is available for module survey and may be used for Power on Reset.
Input and output EMC filters are integrated to simplify module implementation directly on the digital board with only one additional component (resistor for output voltage adjustment).
PERSONAL CONSULTATION
From component selection to design-in: our sales team advises you in person, by phone, video call or on site. We will set aside 30 minutes for you.
PERSÖNLICHE BERATUNG
Von der Bauteilauswahl bis zum Design-in: Unser Vertriebsteam berät Sie persönlich, telefonisch, per Videokonferenz oder vor Ort. Wir nehmen uns 30 Minuten Zeit.